= RBM 33G =

Openwrt GPIO setup, we found GPIO pin 5,6,7,8 to be output as in figure.


Now first step is making GPIO available in OpenWRT:
{{{
echo "6" > /sys/class/gpio/export
}}}
then you need to decide if it will be input or output, as we will use it as a switch so we need output
{{{
echo "out" > /sys/class/gpio/gpio6/direction
}}}
and last line turns GPIO on or off with 1 or 0:
{{{
echo "1" > /sys/class/gpio/gpio6/value
}}}

[[Image(image2021-5-28_11-39-20.png,50%)]]