Keepalived active stand by

On master site ip 10.7.168.221, file /etc/keepalived/keepalived.conf. All config in /etc/keepalived can be found here​

root@n4:/etc/keepalived# pwd
/etc/keepalived
root@n4:/etc/keepalived# more keepalived.conf 
vrrp_script chk_service_health {
    #script /etc/keepalived/check_proc.sh
    #script /etc/keepalived/check_ping.sh
    weight 10
    # how often script run in period 10 sec
    interval 5
    # How long to wait for the script to return (5 seconds).
    timeout 5
    # How many times the script must return successfully in order for the host to be considered healthy.
    rise 3
    # How many times the script must return unsuccessfully (or time out) in order for the host to be considered unhealthy
    fall 3
}

vrrp_instance VI_1 {
        #state BACKUP
        state MASTER
        interface ens3
        virtual_router_id 51
        priority 201
        advert_int 10
        authentication {
              auth_type PASS
              auth_pass 1234
        }
        unicast_src_ip 10.7.168.221
        unicast_peer {
             10.7.168.58
        }
        virtual_ipaddress {
             10.7.168.200/24
        }
        track_script {
            chk_service_health
        }
        notify /etc/keepalived/keepalived_notify.sh
        notify_master /etc/keepalived/keepalived_notify_master.sh
        notify_backup /etc/keepalived/keepalived_notify_backup.sh
}

At user directory /home/ubuntu, pls see files check_containner.sh​, notifyFile_3.sh​, stop_notifyFile_3.sh​ use for start/stop docker. For sync with unison, we need to place file default.prf​ in ./unison/default.prf user folder /home/ubuntu/.unison. Pls note, unison need to use ssh-keygen to authentication and place in user as /home/ubuntu/.ssh/authorized_keys.

ubuntu@n4:~$ tree -L 2
├── check_containner.sh
├── default.prf
├── notifyFile_3.sh
├── omd-labs-docker
│   ├── Dockerfile.omd-labs-debian
│   ├── Makefile.omd-labs-debian
│   ├── README.md
│   ├── ansible_dropin
│   ├── hooks
│   ├── run.sh
│   ├── scripts
│   └── site
└── stop_notifyFile_3.sh

After wake up, we need to start docker database and sync to mysql group replication. In command docker exec -i, we use only -i not -it because -t was a tty console when run as a script it was not from tty console so we need to use only -i (interactive mode)

#!/usr/bin/bash

logfile=/tmp/nodedb1.log
container_name=nodedb1
/usr/bin/docker start $container_name
echo "docker start $container_name" >> $logfile
sleep 10
if [ "$( docker container inspect -f '{{.State.Status}}' $container_name )" == "running" ]; then 
   echo "$container_name is running" >> $logfile
else
   echo "$container_name is not running, we will start again" >> $logfile
   /usr/bin/docker start $container_name
   echo "start $container_name Done!!" >> $logfile
fi

if [ "$( docker container inspect -f '{{.State.Status}}' $container_name )" == "running" ]; then
   cmd1="/usr/bin/docker exec -i $container_name mysql -uroot -pmypass -e \"STOP GROUP_REPLICATION;\" \
                      -e \"SET @@GLOBAL.group_replication_group_name='aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeeeee';\" \
                      -e \"SET @@GLOBAL.group_replication_local_address='$container_name:33061';\"\
                      -e \"SET @@GLOBAL.group_replication_group_seeds='$container_name:33061,nodedb2:33061,nodedb3:33061';\" \
                      -e \"change master to master_user='repl' for channel 'group_replication_recovery';\" \
                      -e \"START GROUP_REPLICATION;\"  " 
   echo "$cmd1" >> $logfile
   eval "$cmd1" 2> /tmp/err.log 1>> $logfile
   sleep 10
   echo "$container_name join group_replication" >> $logfile
   cmd2="/usr/bin/docker exec -i $container_name mysql -uroot -pmypass -e \"SELECT * FROM performance_schema.replication_group_members;\" "
   echo "$cmd2" >> $logfile
   eval "$cmd2" 2> /tmp/err.log 1>> $logfile
else
   echo "$container_name still not start" >> $logfile 
fi

For standby site (backup site ip 10.7.168.58) config can be found here​